Does Boiling Water Remove Chlorine? How to Dechlorinate Water

You’ve probably heard about the health risks associated with chemicals added to tap water. Now the question is Does boiling water remove chlorine? Because of the link between chlorine (and chloramine), a chemical that is added to almost all tap water, many people want to remove it from their water.

Does Boiling Water Remove Chlorine

Does Boiling Water Remove Chlorine?

There are several methods for removing chlorine from water, but boiling is often recommended as the simplest. One popular method for removing chlorine from water is to boil it off.

By boiling tap water for 15-20 minutes, chlorine can be removed. This method removes the majority of chlorine, but a small amount may remain in the water. Boiling does not remove chloramine from water effectively.

Chlorine is a gas that is extremely volatile in water. It is mixed into tap water to kill harmful bacteria and make it safe to drink. Fortunately, because this gas is so volatile, it will eventually escape from the water.

Raising the temperature increases the amount of chlorine that can be evaporated in a given amount of time, so boiling it for 15-20 minutes should remove a significant amount of the chlorine.

While this works, it is far from the most efficient method. It is not particularly fast and can consume a significant amount of energy. As a result, it’s useful in a pinch, but there are other options you might prefer.

Ways to Remove Chlorine from your Water

With boiling out of the way, let’s look at some other methods for removing chlorine from water. Because chlorine is relatively easy to remove, there are numerous methods for removing it from your water.

To keep things simple, We’ve listed the two simplest and most common methods for removing chlorine from water.

1. Let It Evaporate Over Time

Allowing your water to sit uncovered for an extended period of time is one of the most popular, easiest, and cheapest ways to remove the majority of chlorine.

We know this as off-gassing, and it works similarly to boiling water. Over time, the chlorine slowly evaporates from the water, leaving only a trace.

People usually leave their water in the fridge after evaporating chlorine for drinking rather than leaving it at room temperature because it keeps it cool.

This method can take up to 24 hours, depending on the amount of water you leave out and the size of your container.

For the fastest evaporation time, you need to get a large surface area of the water exposed. It’s best to leave the water in a very wide container if you’re wanting to use it as soon as possible.

If you have plenty of time, it’s a good idea to leave the water for 24 hours so you can make sure that most of the chlorine is gone.


2. Activated Charcoal Filter

Using activated charcoal (carbon) to remove impurities and chlorine from your water is the fastest and most effective method to do it.

If you don’t have time to boil your water or leave it to sit overnight, it’ll be worth picking up a charcoal filter. You can install these to your kitchen sink. Also, to get a filtered water bottle, or even get them installed for your house’s water system.

Using an activated charcoal filter will remove chlorine, as well as any herbicides and pesticides, making your water considerably safer to drink.

This method is far superior to just boil your water and is much more convenient. If you can afford it you should definitely get one.

Make sure that you’re replacing your charcoal filter after every recommended use period or amount. The amount of time/uses you get from it should be specified in the manufacturer’s guide.

Is there Any Need to Remove Chlorine from Water?

For a long time, chlorine has been widely used to kill bacteria in water and make it safe to drink in general. As a result, while chlorine is necessary for keeping water lines clean, it is not something you should drink.

There are numerous health risks and undesirable characteristics associated with chlorine in drinking water, so it is best to avoid it whenever possible. Here are a few of the issues that can arise when chlorine is added to water:

1. It Makes Water Smell and Taste Worse

There’s absolutely nothing pleasant about the smell or taste of chlorine. However, you should know how overwhelming the smell of chlorine can be when you go near a public swimming pool and you’ve probably managed to get it in your mouth at some point too.

Although it’s not as strong as what you’d get in a swimming pool. Also, you can still get that offputting taste and smell in your drinking water and it’s definitely something you want to avoid.

2. It Increases the Risk of Respiratory Problems

Some cities use a very high amount of chlorine in tap water and this can lead to more problems if you suffer from certain respiratory conditions like asthma.

Chlorine can irritate the airways of some people and cause them to feel discomfort or mild difficulty breathing.

3. It Can Cause Cell Damage

Chlorine is added to water to kill bacteria and other living organisms, but it can also do harm to our bodies. It’s a strong disinfectant that can effectively damage human cells.

Drinking water that contains chlorine has the ability to destroy cells inside our bodies and therefore cause a whole load of unwanted issues.

This cell-destroying trait is why a lot of people see it as a potential carcinogen.

4. It Messes with your Gut

Because chlorine is so effective at killing bacteria, it can harm your gut’s natural healthy bacteria. If the bacteria in your gut are out of balance, it can lead to a slew of health issues such as IBS, obesity, and autoimmune diseases.

Because the bacteria in your gut regulate so many things in your body. Therefore, it’s critical that you do everything you can to keep it healthy.

If you fine this article about does boiling water remove chlorine informative. Please leave your comment and questions in the comment box below. Feel free to share with your friends and loved ones.

CSN Team.

Similar Posts